Important note:
This kit is un-assemble, buyer needs to do this by their own
Servo motors are not included

Assembly tutorial:

https://drive.google.com/file/d/1TT0AAUqe5igSpWb-QNEeikq-fLzBwq07/view?usp=sharing

Video:

• https://www.youtube.com/watch?v=sUqOYZuE3xA&ab_channel=DesignMaker

PDF: http://t.ly/EiBR

✍ 4DOF Robotic Arm is a pocket-size robot arm. It was conceived to make robotics, electronics, and programming accessible – by driving down the cost of robot arm ownership. The ultimate aim is to make something low cost that you can build with nothing but a screwdriver and enthusiasm. MeArm is the world’s most accessible robotic learning tool. It’s a perfect kit for a Maker project or to inspire interest into STEM (science, technology, engineering, and mathematics) subjects, introducing engineering, robotics, electronics and opening up a whole world of programming possibilities

===========================================

▼ Specifications:

• Name: 4DOF Robot Arm Kit
• Type: DIY robot
• Degree: 4 degrees of freedom
• Material: Acrylic / Plywood
• For: 8 years old and above
• Weight: about 100g

▼ Package Included:

• Board & screws for arm

NOTE:
✍ This Robot Arm NOT for heavy duty or to lift and manipulate heavy loads. This only for learning purpose.
✍ Make sure each joint can rotate smoothly otherwise it would drive a large amount of current in the servo which leads to Stall (Blocked) situation and the servos could be easily burnt out.
✍ As the servo is a high amperage usage motor, prefer OFF the robot arm for resting after 1 minute. If not, it may damage your control board (such as UNO) voltage regulators.