✍The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560.

✍The board has a compact form factor of 38X55mm and is an excellent solution for developing projects based on ATmega2560.

✍The Mega Pro Embed functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonators is present on the board.

✍The board has a Micro USB connector that allows you to connect the microcontroller to the computer via the USB-UART adapter CH340(A driver installation may be required). Download drivers: Windows, Linux, Mac, Android.

✍The board can be powered directly through the Micro USB connector, or via the corresponding contact on the board (Vin). The used voltage regulator operates in a range of 6 to 9V DC.

✍The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

✍The voltage regulator allows to use up to 18V as an input value, however we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device.

===========================================

▼Specifications
Microcontroller ATmega 2560 (16Mhz)
USB-TTL converter: CH340
Memory Size: 256kb
Data RAM Type/Size: 8Kb
Data ROM Type/Size: 4Kb
Voltage range Vin pin: 7 – 9VDC
Maximum current 5V Supply
via Vin: 800mA
5V via USB: 500mA
3.3V: 800mA
I/O: 70 digital, 16 analog
UART: 4 bus
Size: 38mm x 52 mm

Package Includes
1 x Mega2560 Pro
Pins

╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋╋
*Please note that the boards have a CH340G USB-Controller, they are recognized on Linux without any additional drivers. Mac OS and Windows users may need to install an additional driver.

▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖▖
???? Anything can ws us @ +6018 2870 232 ✅