✍ Connect your Arduino or Raspberry with the SIM800L
Sim800L is a GSM/GPRS module. You can send a message, make a call, transfer data though the GPRS or something else.

✍ The SIM800L Quad-band Network Mini GPRS GSM Breakout Module is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode. It communicates with the microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.

- - - - - - - - - -- - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - -

▼ Features
Quad-band 850/900/1800/1900MHz
Send and receive SMS messages
Scan and receive FM radio broadcasts
Lead out buzzer and vibrational motor control port
AT command interface with "Auto baud" detection
SIMCARD: micro SIMCARD holder

▼ Descriptions
Supply Voltage: 3.7V ~ 5VDC
Power Saving: Sleep mode 0.7mA (AT+CFUN=0)
Frequency Bands: Quad-Band: GSM850, EGSM900, DCS1800, PCS1900
Transmitting Power
Class 4 (2W) at GSM850, EGSM900
Class 1 (1W) at DCS1800, PCS1900
GPRS Connectivity
GPRS Multi-Slot Class 12 (Default)
GPRS Multi-Slot Class 1-12 (Option)
Temperature Range: -40 to +85 °C
Storage Temperature: -45 to +90 °C
Data GPRS
GPRS Data down-link transfer max: 85.6 kbps
GPRS Data up-link transfer max: 85.6 kbps
Coding Scheme: CS-1, CS-2, CS-3 and CS-4
PAP Protocol for PPP connect
Integrate TCP/IP Protocol
Support Packet Broadcast Control Channel (PBCCH)
CSD Transmission Rates: 2.4, 4.8, 9.6, 14.4 kbps


▼ Package included
1 x SIM800L
1 x Antenna