✍ Product features:

1.ESP32-S3 WROOM is designed based on ESP32S3-WROOM-1 module of PCB onboard antenna.

2.ESP32-S3 development board can be matched with OV2640/OV5640 cameras.

3.ESP32-S3 is a low-power MCU system on a chip (SoC), which integrates 2.4 GHz Wi-Fi and low-power Bluetooth dual-mode wireless communication.

4.ESP32-S3 has a complete Wi-Fi subsystem and a low-power Bluetooth subsystem. It has industry-leading low-power performance and RF performance, supports a variety of low-power working states, and can meet the power consumption requirements of various application scenarios.

5.ESP32-S3 chip provides rich peripheral interfaces, and has a variety of unique hardware security mechanisms. The perfect security mechanism enables the chip to meet strict security requirements.

✍ Performance parameters:

Controller: XtensaR dual-core 32-bit LX7 CPU with frequency up to 240MHz.

Storage:

384 KB ROM

512 KB SRAM

16 KB RTCSRAM

8 MB PSRAM

Working voltage: 3V to 3.6V

Up to 45 GPIO

2*12-bit ADC (up to 20 channels)

✍ Communication interface:

2 12c interfaces

2 12s interface

4 SPI interfaces

3 UART interfaces

1 USB oTG interface.

Temperature range: -40 to 65 degrees Celsius

✍ WiFi

Support IEEE 802.11 b/g/n protocol.

Support 20 MHz and 40 MHz bandwidth in 2.4 GHz band.

Support 1T1R mode with data rate up to 150 Mbps.

Wireless multimedia (WMM)

Frame aggregation (TX/RX A-MPDU,TX/RX A-MSDU)

ImmediateBlock ACK (immediate block ack)

Fragmentation/de-fragmentation-beacon automatic monitoring (hardware TSF) -4× virtual wi-Fi interface.

At the same time, it supports lnfrastructure BSS) Station mode, SoftAP mode and Station+ SoftAP promiscuous mode. Please note that when ESP32-S3 scans in Station mode, the SoftAP channel will change at the same time.

Antenna diversity

802.11 mc FTM

Support external power amplifier

✍ Bluetooth

Low power Bluetooth LE):Bluetooth 5, Bluetoothmesh.

High power mode (20 dBm, sharing PA with Wi-Fi)

The rate supports 125Kbps, 500Kbps, 1 Mbps and 2 Mbps.

AdvertisingExtensions (advertising extensions)

MultipleAdvertisement Sets Channel selection algorithm # 2 Wi-Fi and Bluetooth coexist and share the same antenna.

Advanced peripheral interfaces and sensors

45 xGPIO port

✍ Digital interface:

- 4xSPl

-1xLCD interface (8 bits

-16-bit parallel RGB,l8080,MOTO6800), supporting the conversion between RGB 565, YUV422, YUV420 and YUV411.

-1xDVP8 bit ~16 bit camera interface

-3xUART

-2xl2C

- 2x 12S

- 1xRMT (TX/RX)

-1x pulse counter

-LED PWM controller

===========================================

▼ Package Included :
1 x ESP32-S3-CAM Module
1 x Camera OV2640 w/ Cable


Tutorial:
https://randomnerdtutorials.com/esp32-cam-video-streaming-face-recognition-arduino-ide

Troubleshooting Guide:
https://randomnerdtutorials.com/esp32-cam-troubleshooting-guide