✍ You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Of course, it is not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino or by just wiring up with the Servo library. Comes with a few horns and hardware.

✍ To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE. Position "0" (1.5ms pulse) is middle, "90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

- - - - - - - - - -- - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - -

▼ Specification :

Operating speed (4.8V no load) : 0.12sec / 60degrees

Operating voltage : 3.0 - 6.2V

Temperature range : -30 C ~ 60 C

Dead band width : 7us

▼ The wire colors are :

Red = Battery(+)

Brown = Battery(-)

Orange = Signal

▼ Package Included:

1 x Micro Servo with Accessories