✍ This is the USB to Serial CP2102 Breakout Board. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.

✍ The CP2102 doesn’t require any external oscillator, it has an on-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.

===========================================

▼ Features :
- Built-in USB to TTL Transfer chip CP2102 Replace FT232
- Designed to be used for USB to TTL Electronic Projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power Output, Work with 3.3v and 5v Target Device
- DTR pin used to programmatically reset target microcontroller